1. MG不朽情缘网站

      Coated CCD detection system


      01-涂布CCD检测系统大图.jpg


      Name

      Parameter

      Detection speed:

      ≤120m/min

      Detection width:

      700mm-1550mm

      Resolution:

      0.024mm/pix (horizontal); 0.048mm/pulse (vertical)

      Dimensional detection accuracy:

      ±0.1mm

      Defect Detection Accuracy:

      0.5mm*0.5mm

      Detect the number of single-sided strips:

      ≤4 pieces

      Overkill/missing rate:

      Misjudgment: 0%, Misjudgment: ≤0.1% GRR≤10% (standard tolerance is ±0.6mm)

      The gray scale deviation of defects and coating film needs to meet ≥30

      Equipment Dimensions:

      Compatible device manufacturers

      Inspection content: width, alignment, defects

      1) Coating width:

      Wet material, dry material (full width, AB surface coating width, blank width, ceramic width)

      2) Alignment:

      Measure the alignment of the AB side at the station of the A side dry material and the B side wet material.

      3) Defect detection:

      Dirt, surface damage, scratches, streaks, bubbles, leaking metal.

      Applicable process:

      Extrusion, transfer, gravure

      1) Coating process:

      Continuous coating, stripe coating, intermittent coating and intermittent stripe coating.

      2) Product process:

      Compatible with AT9 and concave board