Roller press CCD detection system
Roller Slitting Machine CCD Detection System/Labeling Machine
Pole slice CCD detection system
Independent wide CCD re-inspection machine
Tab forming equipment CCD system
Power battery winding machine CCD detection system
Cutting and stacking machine CCD detection system
Power Bare Cell Appearance Inspection Machine
Power battery casing equipment/pre-spot welding
Power battery top cover welding inspection machine
Power battery sealing nail detection system
Inspection of the front six sides of the blue film of the power battery pack
Power battery aluminum shell, blue film appearance inspection machine
Finished battery appearance inspection machine
Power battery connector welding detection system
Blade Battery Measurement Dimension Measuring Machine
Power battery module Busbar testing machine
Power battery module size detection
Small power battery automatic FT test and air tightness testing machine
Copper foil appearance inspection
Aluminum foil appearance inspection
Diaphragm appearance inspection
Aluminum plastic film appearance inspection
Detection principle
· After applying a voltage to the solar cell/module to make it emit light, a near-infrared camera is used to capture its light-emitting image, because the brightness of electroluminescence is proportional to the minority carrier diffusion length
· The defect emits weak light due to its low minority carrier diffusion length, resulting in a darker image
Schematic Diagram
Device parameters
Project | Specification |
Model Specifications | EL140S-M |
Effective test area | 170mm X 170m |
Resolution | 1.4 million pixels |
Sensitivity | Can detect defects with contrast >5 |
Testing time | 0.6s—10s free setting |
Test method | Probe Contact |
Power parameters | Single-phase 220V 10A, maximum load voltage 60V, maximum load current 10A |
Configuration | Test machine (including infrared imager), computer, professional software |