Roller press CCD detection system
Roller Slitting Machine CCD Detection System/Labeling Machine
Pole slice CCD detection system
Independent wide CCD re-inspection machine
Tab forming equipment CCD system
Power battery winding machine CCD detection system
Cutting and stacking machine CCD detection system
Power Bare Cell Appearance Inspection Machine
Power battery casing equipment/pre-spot welding
Power battery top cover welding inspection machine
Power battery sealing nail detection system
Inspection of the front six sides of the blue film of the power battery pack
Power battery aluminum shell, blue film appearance inspection machine
Finished battery appearance inspection machine
Power battery connector welding detection system
Blade Battery Measurement Dimension Measuring Machine
Power battery module Busbar testing machine
Power battery module size detection
Small power battery automatic FT test and air tightness testing machine
Copper foil appearance inspection
Aluminum foil appearance inspection
Diaphragm appearance inspection
Aluminum plastic film appearance inspection
Features
· Precise numerically controlled integral surface RGB shadowless light source, fully imported industrial CCD and lens with tens of millions of pixels
· Highly integrated equipment structure, easy installation, stable system, simple operation & maintenance
· Online detection, seamless connection with production line MES
· Using the high chromaticity restoration algorithm, it can truly restore the color of the cell, and accurately distinguish the color difference between different cells or the color difference within the same cell, so as to perform high-precision sorting
Project | Specification |
Camera resolution | 20000000 |
Equipment size | L320xW461xH801m |
Applicable Wafer Size | 156*156~166*166 mm |
Applicable Wafer Type | Monocrystalline, polycrystalline, diamond wire monocrystalline, polycrystalline, PERC cells |
Maximum capacity | 7000PCS/small |
Pixel Accuracy | <0.047mm |
Detection accuracy | <0.09mm |
UPTime | >98% |
False positive rate | <0.5% |
Missed rate | <0.1% |
Project | Quality Degradation Criteria | Detection Capability Requirements |
Scratch | L<1.5mm、W<1mm | L≥1mm、W≥0.5mm Detectable |
Dirty | S<3mm² | S≥0.3mm² Detectable |
Chromatic aberration | Obvious whitening, yellowing, and redness are not allowed when viewed from a distance of 50cm | Partial (S≥2mm²) redness, yellowness, whiteness, greenness, etc. can be detected |
Pigmentation | S≤4mm² | S≥0.3mm² Detected |
Little white dot | S≤4mm² | S≥0.3mm² Detectable |
Watermark | S≤5mm² | S≥0.3mm² Detectable |
Crack | Not allowed | Detectable with naked eye |
Fingerprints | Not allowed | S≥1mm² Detectable |
Notch | Not allowed | S≥0.2mm² Detectable |
Chipping, notch | L<1.5mm、H<0.5mm、S≤4mm² | L≥1.5mm、H≥0.5mm、S≥2mm² Detectable |
Imaging effect